Overview
Polyvine Varnish & Paint Remover is a water-based, non-toxic, emulsion gel that can remove multiple coats of product on a large range of surfaces including floors, doors, walls, furniture and more. Household-friendly due to its ultra-low VOC and solvent, it can be used indoors as well as outdoors and can be washed up with water.
- Ultra-low VOC
- No ventilation required
- Removes multiple coats
- Can be used indoors and outdoors
| Area | Interior & Exterior |
| Recommended Use | Oil and water-based paints (including old lead), emulsions, lacquers, varnishes, and polyurethanes. Safe to use on any type of surface including Wood (hard & soft), Marble, Stone, Brick, Concrete, Plaster , Ceramic Tiles, GRP, Aluminium, Brass, Wood brick, Slate, Plaster, and Fiberglass. |
| Base | Water-Based |
| Coverage | Up to 6m² per litre |
| Drying Time |
Multi-Layered paint: 1 hour to overnight Wood Stains, Varnishes, Lacquers, Shellac: 15- 30 minutes Polyurethanes & Acrylics: 30-45 minutes |
| Application Method | Brush |
| VOC Levels | Ultra-Low |
| Clean Up | Remove as much paint as possible from the equipment before cleaning with water. Wash hands after use. |
Preparation
Shake well to allow product to flow.
Application
Always test a small area of the surface to be treated to ensure you are happy with the finished results
- Apply liberally with a brush.
- The product will need to be left on the surface for between 30 to 45 minutes before removing. Do not leave longer than recommended on veneered surfaces.
- Remove after required time with a scraper or a stainless steel scouring ball. Do not use wire wool as this will cause rust to penetrate into wooden surfaces.
- If required, apply a further coat and repeat. Covering with a plastic film will assist in keeping the product adhered to the surface.
- Once the surface has completely dried out, wash off any residue with a damp cloth or water.
- Use sandpaper to remove any small traces of finish.
- For prolonged use, or if removing toxic and/or lead-based paints, wear protective gloves.
Always follow manufacturer's instructions found on the tin
Aftercare & Storage
Protect from extremes of temperature during storage and application.
Do not allow to freeze.
